DigiPlus

Deutz engine maintenance (Deutz engine maintenance troubleshooting skills) Deutz engine is DigiPluscurrently a very popular engine in the market. It has excellent performance and reliability. However, with the time of use Due to the increase and changes in the conditions of use, the Deutz engine will inevitably have various failures, such as oil leakage, cooling system failure, abnormal noise, insufficient power, etc. So, how to correctly and quickly identify and troubleshoot in the process of using the Deutz engine?This article will introduce the relevant knowledge of Deutz engine maintenance (Deutz engine maintenance troubleshooting skills). I. Oil leakage failure Oil leakage is one of the common faults of the Deutz engine, which may occur in the upper or lower part of the engine. If there is an oil leakage failure, you need to judge the location of the oil leakage first to determine the cause of the failure. If it is found that it is oil leakage in the lower part of the engine, it may be oil leakage from the engine oil sup, oil filter, oil pump and oil pipe. You should check the oil sup, oil pump and other parts first. If it is found that the upper part of the engine is leaking oil, it may be that the valve head, cylinder head, intake manifold and other parts are leaking oil. These parts need to be checked and replaced or repaired in time. II. Cooling system failure The cooling system is a very important part of the Deutz engine. It can prevent the engine from overheating, so as to ensure the normal operation of the engine.If the cooling system fails, the water temperature is too high and the coolant consumption is too fast. If you find that the water temperature is too high, you can first check whether the radiator is blocked, whether the pump is leaking, etc. If it is found that the coolant is consumed too quickly, it may be caused by the aging of the water pipe, the leakage of the water pump, etc., and these parts need to be replaced in time. III. Abnormal noise fault. The abnormal noise fault of the Yitz engine may occur inside or outside the engine. If there is an external abnormal sound, it is possible that the surrounding parts are abnormal when the engine is running. It is necessary to check the crankshaft, camshaft, flywheel and other parts. If there is an internal abnormal sound, it may be caused by the failure of the piston ring, bearing wear and other reasons. These parts need to be replaced in time. IV. Insufficient power failure. Insufficient power failure is one of the common faults in the Deutz engine, which is manifested as low engine power output, slow vehicle running, etc.If there is a fault of insufficient power, you can first check whether the intake pipe, oil road and other parts are blocked, resulting in insufficient air or fuel. If no problems are found in these parts, it is necessary to check whether the engine cylinder pressure and fuel supply system are normal, so as to determine the cause of the failure. In a word, although the Deutz engine has reliable performance, it is inevitable that various failures will occur during long-term use. Correct and quick identification and troubleshooting is the key to keeping the Deutz engine working normally. If you encounter a failure when using the Deutz engine, please refer to the relevant knowledge introduced in this article. At the same time, it is recommended to carry out regular maintenance and overhaul to ensure the long-term stability and reliability of the engine.

Contact Us
Phone：020-83484669