DigiPlus Philippine

Engine switch (restart your engine: how to use the car start button correctly) The DigiPlus Philippineuse of car start buttons is becoming more and more common.Compared with traditional car keys, it is more convenient and further proves the power of technology. However, it should be noted that although the start button seems simple, it has some details that need attention. For your safety and to ensure that the car can start correctly, it is very important to use the car start button correctly. Step 1: Determine safety. Before using the car start button to start the engine, the most important thing is to ensure that your car is in a safe state. Make sure your car is in the correct driving mode (such as parking or idle), tighten the handbrake, and the doors are tightly closed. In addition, make sure that your seat is adjusted correctly, and the foot pedals and steering wheel are generally comfortable. Step 2: Take your foot off the brake or clutch pedal. Next, you need to lift your foot off the brake or clutch pedal.If your vehicle is a manual transmission, you need to make sure that the shift lever has been moved to the correct position before lifting the clutch. Step 3: Press the start button. Now, you can press the car start button. Press and hold the button for 1-2 seconds until the car starts. If nothing happens during this period, you may need to press it again. It should be noted that do not step on the accelerator immediately after pressing the start button. Your car uses an electronic trottle, and it will take some time to respond. Step 4: Make sure that the engine has started. When you press the car start button, the engine should start quickly. If the engine does not start and you hear an abnormal sound, it means that you need to take some measures. First of all, you need to press the car start button, and sometimes you may need to hold the button for a longer time.If it still doesn't work, it may be because your car's battery is low. Step 5: Stay alert. Before you drive on the road, you need to make sure that the engine is fully started. You should not only listen to the sound, but also see if some warning lights on the dashboard are off (such as throttle indicator lights and engine fault indicator lights). In addition, you should always be vigilant to ensure that your car is running normally. In summary, before using the car start button correctly, it is necessary to ensure that the car is in a safe state, and it is necessary to keep in mind the correct steps taken. Finally, be vigilant and make sure that your car is running normally. By understanding these key points, you can start your car more safely and get rid of the tedious car key switch.

Contact Us
Phone：020-83484669